Análisis lineal, diseño estructural y análsis no lineal estático de edificación habitacional de acero estructural
Citas bibliográficas
Enlace de Referencia
Autores
Director
Autor corporativo
Recolector de datos
Otros/Desconocido
Director audiovisual
Editor/Compilador
Fecha
Resumen
El presente documento expone el desarrollo del análisis lineal estático, el diseño estructural del sistema de entrepiso, el sistema de resistencia a cargas laterales y el sistema de cimentación y en análisis estático no lineal de una edificación habitacional de acero estructural de 12 pisos, con dos niveles de sótano, localizado en zona de amenaza sísmica alta. El análisis y el diseño estructural basados en el modelo lineal se realizó conforme a las provisiones prescritas en las capítulos F.2 y F.3 de la NSR-10 y las recomendaciones relacionadas del documento ASCE 7-10. El análisis estático no lineal se llevó a cabo mediante las recomendaciones del documento ASCE 41-13. La determinación de los puntos de comportamiento de la estructura para las dos direcciones ortogonales principales en planta de la estructura se realizó mediante lo establecido en los documentos ASCE 41-13, ATC-40 y FEMA 440. El desarrollo de los modelos de análisis tanto estáticos lineales como estáticos no lineales se llevaron a cabo mediante el uso del software especializado ETABS 2016 Ultimate16.2.0.
Resumen
This document presents the development of the static linear analysis, the structural design of the floor system, the system of resistance to lateral loads and the foundation system with the performance of a nonlinear static analysis of a 12-story structural steel residential building, with two basement levels, located in high seismic hazard zone. The analysis and structural design based on the linear model was carried out in accordance with the provisions prescribed in chapters F.2 and F.3 of the NSR-10 and the related recommendations of the document ASCE 7-10. The non-linear static analysis was carried out by means of the recommendations of the document ASCE 41-13. The determination of the performance points of the structure for the two main orthogonal directions of the structure were determined by the provisions of the documents ASCE 41-13, ATC-40 and FEMA 440. The development of linear and nonlinear static analysis models was carried out using the ETABS 2016 Ultimate16.2.0 specialized software.