Puesta en marcha y calibración de un calorímetro 2277 de ThermoMetric
2018
El trabajo que se expone en el presente documento consistió en la instalación y calibración de un microcalorímetro 2277 Thermal Activity Monitor. Para esto fue necesario el entendimiento del funcionamiento del calorímetro a nivel interno, desde las partes hidraúlicas, pasando por los detalles de la electrónica hasta los principios fisicoquímicos que rigen su funcionamiento. Para confirmar que el calorímetro se encontraba operando de forma correcta se realizaron múltiples calibraciones eléctricas, tanto estáticas como dinámicas, que constituyen un proceso rutinario en la operación del calorímetro. Además, se logró la comunicación del calorímetro con el computador eliminando la necesidad de puertos RS232. El funcionamiento del agitador fue optimizado al sustituir la conexión original a un puerto USB y se caracterizó el efecto del mismo sobre las lecturas calorimétricas. Finalmente, los parámetros usados para estabilizar el calorímetro a 25° C fueron reportados, y se determinó el valor del factor calorimétrico en 28, con el cual la entalpía de mezcla del 1-propanol fue de -7.89 y -7.18 kJ/mol, respectivamente. The work presented in this document consisted in the installation and calibration of a 2277 Thermal Activity Monitor microcalorimeter. For this, it was necessary to understand the operation of the calorimeter internally, from the hydraulic parts, through the details of the electronics to the physicochemical principles that govern its operation. To confirm that the calorimeter was operating correctly, multiple electrical calibrations were made, both static and dynamic, which constitute a routine process in the operation of the calorimeter. In addition, communication of the calorimeter with the computer was achieved by eliminating the need for RS232 ports. The operation of the agitator was optimized by replacing the original connection to a USB port and the effect of it on the calorimetric readings was characterized. Finally, the parameters used to stabilize the calorimeter at 25° C were reported, and the value of the calorimetric factor was determined at 28, with which the enthalpy of mixing of the 1-propanol was -7.89 and -7.18 kJ/mol, respectively.
- Tesis/Trabajos de Grado [133]