Show simple item record

dc.contributor.authorSuárez Paipa, Mauro
dc.contributor.authorLima Montandon, Renato
dc.contributor.authorRaslan, Alberto Arnaldo
dc.identifier.citationRevista de Ingeniería - No. 36 (Ene-Jun. 2012) p. 38-42es_CO
dc.descriptionHidrología de Extremos y Cambio Climático. Sección Técnicaes_CO
dc.description.abstractEDM process commoly use petroleum based died fluids.The aim of this work is to evaluate alternative fluids to traditional mineral ones. It was analyzed 5 different dielectric fluids derived of seeds. They were compared with kerosene and a mineral oil. The workpiece was speed-steel M2. The machining parameters were preestablished for working with copper and graphite electrodes. The material removal rate, the wear rate of the electrodes, the finishing and morphology of machined surface were all measured. Vegetable based oils showed a competitive performance using cooper and graphite electrodes when compared with mineral based oilses_CO
dc.sourceinstname:Universidad de los Andeses_CO
dc.sourcereponame:Repositorio Institucional Sénecaes_CO
dc.titleCase study for the use of vegetable dielectric fluid in die-sink electro discharge machining (EDM)es_CO
dc.subject.keywordAceites vegetales como combustibles - Publicaciones seriadases_CO
dc.subject.keywordTopografía - Estudio de casos - Publicaciones seriadases_CO
dc.subject.keywordMecánica de fluidos - Publicaciones seriadases_CO
dc.journal.titleRevista de Ingenieríaes_CO

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record